You have no items in your shopping cart.
Folding up to a briefcase size the SCB-50 is a lightweight, self-contained, impact-resistant portable power solution. It is IP65 Waterproof. The battery has AC and DC ouputs making it capable of powering every CPAP Machine.
The battery can be charged via
1. 5x 10 Watt mono-crystalline solar panels included
2. AC 220V Wall Socket using the power cord included
3. DC 12V Car cigarette lighter socket using power cord included
4. Additional Solar Panels (NOT INCLUDED).
Ingress protection rating IP65 means total protection against dust ingress and protected against low pressure water jets from any direction.
The SCB-50 can be charged by using the power of the Sun. Open your SCB-50 and for best results, place it in direct sunlight. The battery capacity on Äº LCD display will start going up. Make sure the solar panel can get as much sunlight as possible. The solar panels can be detached from SCB-50 and placed further away if required. To do this first disconnect Solar panel connector next release hinge by pulling Hinge guard away from Solar panels and lift them up. Reconnect SCB-50 to the Solar panels using 5m extension cable(NOT INCLUDED) for solar panels. You can add additional solar panels (Max.100W) by connecting them through × DC 12V~23V INPUT connector and putting them under direct sunlight, to charge the SCB-50 faster (not included). After the LCD display shows the battery 100% full, please close the SCB-50 and / or disconnect additional solar panels to protect the battery. The 32/48Ah internal backup battery will take about 12/18 hours to fully charge. In cloudy conditions, SCB-50 may take approximately 2 times longer to charge than the above mentioned times, but this is depending on the time of year, density of cloud etc. If charging from behind the glass, it will increase the time needed to charge, sometimes up to three times longer than if outside.
AC CHARGING The SCB-50 can be charged by any standard AC 220V wall outlet using the included (b) AC charging cable. Connect (b) charging cable to SCB-50 in to the AC 220V INPUT and plug the other end into any standard AC wall outlet to begin charging. The battery capacity on Äº LCD display will start going up. After Äº the LCD display shows the battery 100% full disconnect the charging cable to protect the battery. The 32/48Ah internal backup battery will take about 6 to 9 hours to fully charge.
DC CHDARGING The SCB-50can be charged by car DC 12V cigarette socket using the included (c) DC charging cable. Connect (c) charging cable to SCB-50 in to the DC 12V-23V INPUT and plug the other end into DC 12V car cigarette socket to begin charging. The battery capacity on Äº LCD display will start going up. After the Äº LCD display shows the battery 100% full, disconnect the charging cable to protect the battery. The 32/48Ah internal backup battery will take about 7 -12 / 10.5 - 18 hours to fully charge. Approx.
Charging Time Approx. Battery charging capacity time Charging method 12V 32Ah 12V 48Ah . AC charging 9 hours . DC charging 10 - 18 hours 50W solar charging 18 + hours
|Portable Solar Power System
|Solar panel: Mono Silicon 50W 16V
Battery: 12V 48Ah lithium polymer
Inverter: Pure sine wave 350W
Lighting : 3W LED lighting&SOS function
Interface (Input): DC12-23V input(solar)
Net Weight: 10.5kg
All CPAP BATTERIES come with a 12 Month Warranty.